ciaociao


poilni cup 4 video!
September 16, 2009, 3:46 pm
Filed under: race, video

mike rafter of motomatic mopeds recorded the races and is putting them on vimeo.
here is the video from the first race!

i placed 5th in this one, there’s no way i could keep up with those guys in the straights.. not to mention i still need to work on my riding ability off the straights.

i’ll post up the second race too, once it’s online. that one should be entertaining, though i’m not going to tell you why and spoil the fun!

Advertisements


power hour
August 13, 2008, 12:49 pm
Filed under: carb, cdi, clutch, electronics, fail!, intake, motor, performance, variator, video


so early last week we had a 90+ deg. day here in seattle, which means it probably got up to 3000+ deg. in my bed room. my computer melted down. 😦
i haven’t had a chance to assess the damage, i’m hoping it was only the video card.
this has made it difficult for me to keep you guys up to date. sorry!


ciaociao’s first start! sorry so dark, austin took that at 3am last thursday, the first day of the rally.
it made the first day! i was stoked.

however, i was plagued with problems. haha
about half way through the ride the clutch bell was billowing smoke. i have yet to tear into it to figure out why. my guess is that one of those malossi springs broke and i was dragging a pad the whole time.
also, i noticed the fan was ungluing itself from the spacer mikemike and i made for it.
the fan was just kind of pressed onto the spacer, and then glued.


the concept was perfect, just the execution was a little off. it fit perfectly.

and it worked great! but the glue was failing, so it’s time for something new. i think we will build another spacer like this one, but give it teeth around the out side, heat it up and press it into the fan. THEN i’ll go over it with some epoxy.

the plastic fan with the tiny rotor reaaaally made this thing rip.
you can kind of tell in the video above that the throttle response is amazing. with no weight on the crank, it would speed up and slow down super fast.. and the whole thing was super simple! well, again, the concept was simple, actually making it happen took some work.
first we made the stator plate and got the coil and everything bolted up. we used a timing light to time it.

then the fan/spacer combo slides down the shaft and rests on the rotor.

then the fan shroud gets bolted on and it’s ready to be put in the frame.

once in the frame, the variator is installed and the big nut smashes everything together.

also, as you can see, the carb fit right in there! it took some manipulation of the frame, and a razor blade to shave down a plastic phbg bowl in just the right spots, but it fits perfect.

so anyway, riding it. i had it jetted waaay too rich. anything past quarter throttle sounded like i was riding under water, it was four stroking so bad.
but it was fast.
man, when i found the sweet spot at 1/4 throttle, the fork would unload and off it went.. it was a little scary. i can’t wait to see what full throttle is like.. oh man.

after the smoky clutch and fan coming apart on me, i decided to put it away for the rest of the rally and to ride a less intense bike.
creature rally is in a month and a half. i was hoping to have this thing painted and finished by then, but i have some serious tuning to do before then, so we’ll see.
i need to jet it proper, need to drill out or find new weights for the variator (it was variating before the clutch would grab, yet would ride wheelies on command), make sure this clutch doesn’t blow up on me and get the fan issue tamed.
and hopefully get the fork finished and loose the heavy bravo forks.
and get the frame braced and welded up.
yay, mopeds are fun again!



i’m gonna live forevah
January 10, 2008, 4:44 am
Filed under: video, vintage ad